Click here to get 20% OFF on all products and supplies


Are your eyelashes, eyeliner vegan and cruelty-free?

Our eyelashes are made from synthetic silk and no animal products are used in the manufacturing of our lashes. All of our products are cruelty-free and suitable for vegans.


What are your lashes made from?

Our lashes are made from premium synthetic silk. No animal products are used in the manufacturing of our lashes


Are there magnets?

The MINTNETIC system is completely magnet free. Many of the magnetic lash systems have adhesive that is difficult to take off, causing rashes, redness and irritation from scrubbing. We wanted to offer the same ease and long lasting wear of these systems combined with a gentle formula that comes off without scrubbing. 


Are your eyeliner waterproof and the lashes wind resistant?

MINTNETIC lashes are wind resistant and have been tested. In other words, they are not going anywhere! MINTNETIC eyeliner is water resistant and will stay all day with zero smudging in the rain and during workouts. 


Does the clear eyeliner dry white?

Our clear liner goes on clear and dries clear with no white pigment, giving your lashes more of a natural look. For extremely sensitive eyes, we recommend our clear eyeliner.


Can I use mascara with the eyelashes?

We don't recommend using mascara. However, you can use mascara to help blend the false eyelashes with your own eyelashes. Please be aware that using mascara may affect the longevity of your lashes.


How do I remove the Pro-Tip Bond Eyeliner?

It’s quite simple! Use our Lash Shampoo along with a cotton pad or lint free applicator and swipe along your upper lash-line until the eyeliner is gone.

Our Lash Shampoo was specially formulated for MINTNETIC and contains natural botanical extracts, including aloe, to combat redness and irritation. This foam can be purchased wherever MINTNETIC is sold.


How long do the lashes and eyeliner last?

Our MINTNETIC lashes last up to 30 wears and our MINTNETIC adhesive eyeliner lasts up to 60 uses.


How do I apply the Pro-Tip Bond Eyeliner and lashes?

Prior to applying the eyeliner, make sure the eye area is clean and free of oils and creams. The adhesive eyeliner will not stick onto an oily surface. If you are more oily than normal, we recommend applying primer or a light powder to the lash line.

When applying the lashes, the eyelash band must cover the eyeliner. If it doesn't, the lashes will loosen throughout the day as the contact area is not completely covered. Another reason it may loosen throughout the day is because the lash itself is not properly sized to your eyes which will also cause the edges to lift.


How long should I let the Pro-Tip Bond Eyeliner dry for?

Allow the eyeliner to completely dry for about 60 seconds, then apply the lashes. We recommend applying a second layer for that extra hold!


How much eyeliner should I apply?

Apply one layer of eyeliner with enough coverage to allow the MINTNETIC lashes to adhere. Allow to set for 60 seconds until tacky, then apply the lashes.

For a firmer hold. Apply a second layer and let the second layer set for another 60 seconds then apply lashes while the eyeliner is still tacky.

You can also apply a thin layer of eyeliner on the band of the strip lashes for more staying power. 



What’s is "Micro Pressure Bond" Technology?

We utilize an ingredient called styrene/acrylates copolymer which functions as a film forming agent to create what is known as PSA, or a pressure-sensitive adhesive. There are many categories of adhesives (such as silicone, glue, cement etc.) and while this adhesive is one of them, it is not pressure-sensitive adhesive. PSA are a type of non-reactive adhesives that form a bond when light pressure is applied with a surface. This bond occurs when a false lash is applied to the formula. PSA’s exhibit viscoelastic (viscous & elastic) properties and are removable, which is what allows our lashes to re-stick. If you apply your lashes incorrectly, you can remove it and reapply - without needing to add more adhesive.



IMPORTANT: Please ensure that your eyelid is free from oil before applying your MINTNETIC Pro-Tip Bond Eyeliner, this will improve the eyeliner's hold - For oily lids, please cleanse the eye area and ensure it is completely dry. For best results, apply a setting non-oil based eye primer or dust with powder or use eye shadow as a base.

DO NOT use any cleansers with oil to clean your MINTNETIC lashes as this will cause them to fall apart. 


EYELASH CARE: After every use, please clean your lashes with any oil free makeup remover. Soak a lint free applicator in the cleanser and gently remove the excess eyeliner from the false lashes. Please take care while doing this as your lashes are very fragile. Once you have cleaned the excess liner from the lashes, they are ready to be placed back into their storage box.

Warning: If you do not clean the excess eyeliner from the eyelashes after use they may fuse to the adhesive eyeliner in the storage box. This will decrease the longevity of your eyelashes.



Remove the eyelashes from the box with the lash applicator. Along the band of the eyelashes, remove the sticky adhesive before applying- the adhesive is used to keep the lashes in place and its shape.

Step 1 - Starting at the outer edge of your eye, hold your strip lashes up against your eye to see how they will fit. Roll the lashes gently to adjust to your eye shape. Trim the lashes if necessary. It is advised that you trim the edges of the lashes down on both ends. This will stop them from lifting.

Step 2 - Shake the eyeliner pen and apply as you normally would to a clean, oil free lash line. Allow to set up to 60 seconds until tacky, then apply the lashes.  

Step 3 - Start at the outer corner of your eye. Place your lashes onto the liner and adjust until they are perfect. Then press firmly to ensure they are secure. If you need to adjust the lashes you may have to reapply the eyeliner first. Apply Mascara to blend in your own lashes if needed. Please be aware that mascara may affect the longevity of the lashes.

For Best Results (Firm hold) - Apply a layer of eyeliner and let fully dry for 60 seconds, then apply second layer of eyeliner. Let the second layer set for  another 60 seconds and apply lashes while the eyeliner is still tacky.

You can also apply a thin layer of eyeliner on the band of the strip lashes for more staying power. Remember to let it set for 60 seconds.

Removal - Gently pull the lashes away from your eye. Use cleansing foam with a lint free applicator to remove the eyeliner from your eye area. Clean excess eyeliner from lashes with a cleanser before placing back in the storage box.